STOP & SHOP – MARCH 2010
FOR SALE
1955 Ford P/U, color PPG Copperhead, ground up, engine out of a 86 Corvette-TPI
350/700R, tilt forward hood, 71 C-10 front end with power disc brakes, power steering,
air ride, 12 bolt GM 2.56 gear with drum brakes, 4 link with coil over shocks, shaved
handles, power windows, LED 3rd brake and tail lights, oak bed with stainless steel
strips, 20 gallon stainless steel gas tank. $24,000.00 obo
For more information Home 563-552-1263 03/10
- - - - - - - - -
'46 Mercury cpe. project car. No engine, transmission, wiring, radiator. Titled. Rolls on
stock suspension with incorrect wheels. Needs very little floor repair, but does need
rockers. All the fender and body stainless trim is there. $2,250.
'46 Ford cpe. project care, Has Bitchin' firewall installed. Needs rockers on both sides,
some rust repair on floor, quarter panel, and rear fender attachment point. Doors are
solid. 3 fenders and deck lid professionally done. Right rear fender needs work. All
body and fender stainless is there. Missing motor, transmission, radiator, wiring, front
bumper, front seat, door pads, and lower part of rear seat. Rolls on stock suspension
with incorrect wheels. Titled $1950.
-Stock Mustang II spindles and control arms. $55
-4 '46 Mercury hubcaps. Need straightening. $25 for 4.
-Pair '26 Ford "T" running board brackets. $20
-2 16" wheels from 46-8 Ford $10 each
-Tinted door and wing glass fro '73-79 Ford PU. $10 for all
-Rear wheel puller for '28-'48 Ford. Ford licensed from Mac's #A1113T. New, still in
sealed package. Half of new price.
CALL John Peterson, 515-332-5039 03/10
- - - - - - - - -
1960 Rambler American station wagon project.
Very low stance, started with good 98% rust-free Arizona body. Has Mustang II front air-
bagged with Nova brakes, dropped spindles, Heidts lower arms, new power rack, S-10
rear. Includes 1999 Firebird 3800 V6, choice of 700R4 or 5-spd, includes lotsa parts,
including many Rambler body panels, incl doors, hoods! Motor mounts and front
suspension done, with major work on floor, firewall, inner panels and heater-A/C done,
but significant work left to finish, incl inner panels, dash, interior, wiring, etc. Has '90s
heater/A-C out of Geo Storm and good start on framework for dash (cover with cloth and
'glass in?) for '99 Firebird gauge cluster. Needs more window glass and rubber (I have
some already). All new Diamondback wide-whitewall BF Goodrich T/As on Vette ralleys,
this should be an extra-cool mid-size sport cruiser.
$7500 or ?, depending on which parts are included, and my grouchy mood at the
moment.
1957 Volvo PV444. "Mini '48 Ford" sport sedan.. Floor is bad, some other rust, but I
have new rocker and cowl panels for repair. Very rare factory assembly-line cowl-rocker
stampings included. Imagine a mini gasser with the engine up front, or get radical and
stick the '88 Park Avenue 3800 Driveline (or what else have you got?) in the middle like
a Fiero for an ulta chopped and sectioned mid-engine car so it looks more like a LeMans
racer, like the Bentley 8? Dream, baby! Buy body-only $800 or more with extra stuff as
a project package.
Also, I have '88 Toyota Supra front and rear suspension that would be great for this car.
Will consider package deal with the following parts for the dedicated fabricator:
1988 Buick Park Avenue 3800 w/trans and complete front suspension & dash for this
car or the Volvo.
1988 Toyota Supra front & rear suspension, or sell this alone for $500.
ALSO
Complete 2005 C5 Corvette 6-speed rolling chassis.
Theft recovery, not crashed. Body was chopped off, so cowl damaged, windshield
gone, rear inner body cut. No engine, computer or harness, no wheels, tires, interior,
otherwise nearly complete from radiator to exhaust. Outstanding core for street rod, kit
car, rebody or fix a crashed corvette. $7500
Tommy Shaw
tommy@huxcomm.net, 515-597-3325 3/10
- - - - - - - - -- -
1957 Buick Caballero Station Wagon has everything and needs everything, has rusty
rockers & dog legs, floor good, needs windshield replaced otherwise I believe it's all
there - would make a great project and it's 4dr hardtop look lends itself to everyone's
imagination. Asking $4000
Call Steve Klinkefus at 515-491-5861 3/10
- - - - - - -
1937 Chevy Coupe
350 Chevy engine has 7950 miles, 400 Turbo Transmission. Mustang front and 56
Chevy rear suspensions. Custom Interior and Vintage air. JVC stereo & CD player.
Uniden CB. Cruise Control, new fuel tank and exhaust in 2009. 15" Cooper tires and
Eagle Alloy Wheels. Best driving Chevy coupe you'll find.
Price $39,995.00 (obo) Appraised in 2009.
Home phone 515-984-9499, cell 515-208-4809, e-mail: kvhawki47@aol.com 3/10
- - - - - - -
N.O.S. sheet metal
'39 Mercury Right and Left Front
'49-'50 Mercury Right Front Fender; Lower left quarter 4dr
'46-'48 Mercury Left F.
'46 Ford Right F.
'47-'48 Ford fender to hood filler panel, pair
'42-'48 Ford wagon/sedan delivery rear, pair
'49-'50 Kaiser Right F
'46-48 Ford PickUp pair front
Used
'54 Chevy 6 with 4 speed, front/rear suspension, chrome 8 bolt 16' wheels, all from 3/4
ton P.U., will seperate. Runs great, split manifold.
'40 Ford Right F., inner panel, stone guard & headlight bucket.
Call or Email fro prices
Gene Cross (515) 966-2014
barnfind@ccr.net 3/10
WANTED
Bed cover for 84 Chevy shortbox
39 Chevy pickup parts - fenders, grill, hood, frame
37-38 Chevy coupe inside widow moldings
671 blower for small block checy
51 Chevy car parts - any parts left over after rodding your car
Dash Plaques from NSRA Nationals for 1997 and also 1987 and earlier
95 Grand Prix - front bumper
12 bolt posi rearend from older Nova, Chevelle, Camaro
Call Rich Redix at 641-869-5047 3/10
- - - - - - -
Front bumper for 1947 Ford car
Call Jim Brown at 319-825-6123 3/10
- - - - - - -
Front bumper guards for 1950 Ford car
One piece sunvisor for 1950 Ford car
Call Verlyn Noring at 515-961-3648 or 515-971-6414 3/10
NOTE:
All ads placed in the Stop & Shop will run for 3 months. They may be renewed at the
request of the member. The date at the end of the ad is the date placed or renewed.
To place an ad, contact Steve Klinkefus, 485 NW Aurora Avenue,
Des Moines, IA 50313, 515-282-1447, sklinkefus@aol.com
|
Commercial Advertising Rates
|
Placed in 6 monthly issues of Crusin'
Makes checks PAYABLE to ISRA
Send to : Steve Klinkefus, 485 NW Aurora Avenue, Des Moines, IA 50313
Non – Members Members
1/2 page 7-1/4 x 4-/12 $40 $20
1/4 page 7-1/4 x 2-1/4 or 4-1/2 x 3-1/4 $20 $10
1/8 page business card size $10 $5
All Ads must be “ Camera Ready” and may be modified to fit format.
ISRA reserves the right to refuse any ad
|
|
